All listings for: RedPineEquipment


Photo Title
Make Model Year Price
John Deere 548E Skidder ***SOLD***

John Deere 548E Skidder ***SOLD***

1996 John Deere 548E Grapple Skidder. Newer engine, starts & runs good, machine was just repinned and re-bushed from front to back by John Deere, includes center, cradle, blade, & grapple. Strong PowerShift transmission, new shaft, strong hydraulics and cylinders, new glass, heat, no A/C, 28Lx26 tires @ 70% with a set of chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Skidder is located in Northcentral USA. ***SOLD***

John Deere 548E 1996 $39,500
Tigercat 610C Skidder  ***SOLD***

Tigercat 610C Skidder ***SOLD***

2013 Tigercat 610C Dual Arch Grapple Skidder with Winch. This machine has a Cummins QSB 6.7 190 HP engine, runs and starts good, 79.8 gal fuel capacity, 27.8 gallon hydraulic system fluid capacity. 15 degree axle oscillation. 24.5 x32 tires, dual rims. EHS transmission, single-speed mechanical, variable speed hydrostatic. New 6 disc clutch. Grapple capacity - tongs tip to tip 13.1' 2". Heat, A/C, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA. ***SOLD***

Tigercat 610C 2013 $97,500
Bandit Model 2590 Chipper ***SOLD***

Bandit Model 2590 Chipper ***SOLD***

2012 Bandit Model 2590 Chipper. MTHis chipper has a CAT C15 540 HP engine, runs and starts good with 4,000 hours. Wireless Control, Auto-feed System, in-feed conveyor, hydraulic tongue tandem axle with air brakes. Ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Bandit 2590 2012 $235,900
Nova Dry Kiln TTF-6200 Front Load Kiln ***SOLD***

Nova Dry Kiln TTF-6200 Front Load Kiln ***SOLD***

2018 Nova Dry Kiln TTF-6200 Front Load Kiln with High Horsepower Heat & Exhaust. Interior Dimensions: Height: 10' 3.5" Depth: 7' 2", Width: 25' 3". Loading door opening: Height 9' 10" Width 25'3". Side hinged doors, exterior or interior installation. Semi automatic controls with digital readout of dry bulb & wet bulb temperatures. 4" thick walls, R-Value = 16. Aluminum interior & ribbed exterior is metal. High horsepower requirements: 128 BTU/hour. Electrical requirements: 230VAC, 1 Phase, 50/60 cycle, 2.5 kW max. Options: heated floor system, manual feed wood waste furnace, plumbing connection kit for wood waste furnace- one kiln to furnace, factory assemble of dry kiln system. The wood furnace is much larger than needed for kiln so it could be used to heat other buildings as well. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Nova TIF-6200 Unknown $34,900
Hood 24000 Mini Mobile Self Propelled Loader Slasher *SOLD*

Hood 24000 Mini Mobile Self Propelled Loader Slasher *SOLD*

1996 Hood 24000 Mini Mobile Self Propelled Loader Slasher. According to owner, this loader has a John Deere 6 cyl. engine rebuilt 2 years ago. Cylinders & pumps, drive couplings, alternator, boom bushings recently rebuilt as well according to owner. New saw motor and saw blade. Pilot controls on machine. Self propelled carrier in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood 24000 1996 Call for Price
Timberjack 240A Skidder ***SOLD***

Timberjack 240A Skidder ***SOLD***

1987 Timberjack 240A Cable Skidder with a Gearmatic Winch. This machine has a Cummins 4BT engine, runs and starts good, 4 speed transmission in good working order, new flywheel and bearing in the clutch, axles and cradles are in good condition, pretty tight center section, little play in the steer pins, 18.4x34 tires, front tires are @ 50%, back tires are @ 10%. Single Diamond front chains and Double Diamond rear chains. Also has a spare tire to go with. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Timberjack 240A 1987 $29,500

Wanted: Salvage John Deere 759G Feller Buncher

Wanted: Salvage John Deere 759G Feller Buncher. Contact Aaron @ Red Pine Equipment 218-720-0933.

John Deere 759G Unknown Call for Price
Franklin Q80 Skidder  ***SOLD***

Franklin Q80 Skidder ***SOLD***

2005 Franklin Q80 Dual Arch Grapple Skidder with Winch. This equipment has a Cummins 5.9 engine, runs and starts good, Power Shift 6 speed transmission, strong hydraulics and cylinders, both pumps were rebuilt last year, new electronic shifter, M-36 360 grapple, winch is in good working order. 30.5x32 tires @ 95%, also has a new set for the front. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA. ***SOLD***

Franklin Q80 2005 $39,500
John Deere 700H LGP Dozer ***SOLD***

John Deere 700H LGP Dozer ***SOLD***

2004 John Deere 700H LGP Dozer with 6 Way Blade. This machine runs and starts good, Hour meter reads 3,900 hours, undercarriage is @ 65%, sprocket, roller, and idlers are in good working order, 28" pads @ 40%, strong hydraulics and drive, cylinders are in good condition, tight controls. Heat, A/C, and lights. Solid Machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

John Deere 700H LGP 2004 $44,500
Timberjack 230 Forwarder ***SOLD***

Timberjack 230 Forwarder ***SOLD***

1997-98 Timberjack 230 Single Bunk Forwarder. Hour meter reads 8,002 hours, Cummins 4BT engine, runs and starts good, no blow by. Strong hydraulics and transmission, tight center section, tight pins and bushings in the boom and bypass grapple. Steer and blade cylinders are in good order. Tires are 28Lx26 - rear are @ 75%, front tires are @ 50%, with 1 set of diamond chains @ 40%. Solid axles and cradles, good brakes. Fluids were just changed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 230 1997 $44,500
Komatsu 430FXL Feller Buncher ***SOLD***

Komatsu 430FXL Feller Buncher ***SOLD***

2008 Komatsu 430FXL Feller Buncher with Quadco 22B 360 Degree Rotating Hot Saw. Approximately 10,500 hours on machine. Cummins 8.3 engine with newer batteries. Boom foot pin and bushing just replaced. Swing bearing bolts replaced. Newer decals. This equipment is very clean for the number of hours. No cracks or repairs to the boom or the head. Saw blade is in good shape. Grab arms have minimal play in the pins. No leaks on head. The boom pins are tight with minimal play. Hoses are in good shape no major leaks or cracking. Engine is strong with no leaks and almost no blow-by. Hydraulic system is strong and free of major leaks. Undercarriage is @ 50% Turret bolts are all new. Cab is in good shape and all functions work including A/C. Seat is in good shape, no cracked glass. The unit appears to have been well maintained and not abused. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

- 430FXL 2008 $145,000
Tigercat 726B Feller Buncher ***SOLD***

Tigercat 726B Feller Buncher ***SOLD***

2000 Tigercat 726B Feller Buncher. This buncher has a Cummins 8.3 engine, runs and starts good, hour meter reads 10,945 hours, strong hydraulics and cylinders, tight center section, head and grab arms are in good working order, 67.00 tires, 1 set of chains @ 50%, Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Tigercat 726B 2000 $54,500