All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	Tigercat 635E Skidder *SOLD* 2017 Tigercat 635E Bogie Grapple Skidder. Hour meter reads 8,000 hours, recent rebuilt engine, strong hydraulics and hydrostats. Just had all oils tested. all are good. Tight center section, arch and grapple are in good working order, recent pins and line boring on arch, new steer bushings, bogies are in good order. New 35.5 x 32 front tires, and 30.5 rear tires. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. Reduced from $259,000. *SOLD*	Tigercat	635E	2017	$225,000
	Tigercat 822D Processor with a LogMax 7000XT Head *SOLD* SOLD 2015 Tigercat 822D Processor with a 2017 LogMax 7000XT Head. This machine has ~3,600 total hours and the head has ~1,600 hours. 100 hours on new engine due to a recall under warranty, 28" pads, undercarriage is in good working order, has been used as a landing machine. Logmax 7000XT head with Logmate 510 measuring system, top saw runs .404, main saw runs 3/4". Tight boom, pre-heat system, heat, A/C, and lights. New front window. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Tigercat	822D	2015	$299,000
	TimberKing 2000 Sawmill *SOLD* 2013 TimberKing 2000 Sawmill with Full Hydraulic Operation. This equipment has a 49 HP Kubota Diesel engine, approximately 160 hours on the meter, comes with close to 100 blades (about 30 blades are used but can be re-sharpened), also comes with blade sharpener and a blade tooth setter (both are brand new). This machine, once dialed in and set up properly, is very accurate to within 1/16". Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. *SOLD*	Timberking	2000	2013	$35,000
	CAT 518 Grapple Skidder *SOLD* 1992 CAT 518 Grapple Skidder. This machine has a newer engine and transmission 2,500 hours ago, engine, runs and starts good, strong auto transmission, decent center section, John Deere 548 grapple in good working order, tires 30.5 32 with a set of Bear Claw chains. Contact Erik @ Red Pine Equipment 218-720-0933. Skidder is located in Northcentral USA. *SOLD*	CAT	518	1992	Call for Price
	Portable Generator and Welder Set Up Portable Generator and Welder Set Up. This equipment has a Deutz engine, runs and starts good, welder is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	-	-	Unknown	$2,000
	Enclosed Dual Axle Work Trailer with Tools Enclosed Dual Axle Work Trailer with Tools. This trailer includes an air compressor, hose crimper, chop saw, industrial tire tongs, 1/2 to 5/5 pull out chains, 1' drive socket set and many more tools for logging. Newer axles with about 1,000 miles. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	-	Dual Axle	Unknown	$5,000
	Fabtek 133 Harvester with a Fabtek 4 Roller Head *SOLD* 2000 Fabtek 133 Harvester with a Fabtek 4 Roller Head. This equipment has a John Deere engine, runs and starts good, Proheat system. New hydraulic pump, strong cylinders, tight boom and head, new Woodland computer system, grab arms and feed rollers are in good working order. Undercarriage is @ 75%, 24" double pads. Heat, a/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Fabtek	133	2000	$66,500
	Peterbilt 378 Day Cab Log Truck *SOLD* 1990 Peterbilt 378 Day Cab Log Truck. This truck has a CAT 3406 425 HP engine, runs and starts good, fresh oil change, 9 speed Eaton Fuller transmission, new recaps on the drive tires and new virgin steer tires, air ride, good brakes, new cans, 2 stage Jake brake, 3 line wet kit, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Truck is located in Northcentral USA. *SOLD*	Peterbilt	378	1990	$17,000
	Hanfab 60" Pull Behind Slasher *SOLD* 2005 Hanfab 60" Pull Behind Slasher. This equipment has a strong motor, decent hoses, straight blade, good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Hanfab	60	2005	$7,900
	Valmet 415EX Harvester with a Rolly II Head *SOLD* 2007 Valmet 415EX Harvester with a Rolly II Head. This machine has a 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan, pumps are all in good order, & were all recently pressure checked, undercarriage is @ 95%. Rollers, idlers, sprockets, & 24” double grouser pads were all gone through. New computer DASA 4 one year ago, measuring system is accurate, valve bank was rebuilt 1 year ago on the head. Feed rollers and grab arms are all in good order, new head rotator, new main boom no cracks or welds. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Valmet	415EX	2007	$79,500
	Western Star 4900SA Log Truck *SOLD* 1996 Western Star 4900SA Log Truck. This truck has a Reman Cummins N14, new injectors and computer, 18 speed transmission, air ride Hendrickson suspension, new torque rods, 46,000 lbs. rears, new rear end, 2 stage wet kit, full lockers, new rear window, 3 stage Jake brake, new batteries, new floor and head lights, new stainless steel bumper. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Western Star	4900SA	1996	$13,900
	Clark Ranger 665D Skidder *SOLD* 1988 Clark Ranger 665D Grapple Skidder with a Winch. This machine has 200 hours on a rebuilt Detroit 353 engine, 3 speed transmission was rebuilt at the same time, strong Clark winch, tight center section, arch and grapple are tight. 28L x 26 tires with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Clark	665D	1988	$18,500