All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	Western Star 6 Axle Log Truck *SOLD* 2013 Western Star 6 Axle Log Truck with 5 Axle Pup Trailer. Storm clean up / debris boxes available. This Truck has Charmers suspension, fresh in-frame overhaul, 2 Lift axles, front steerable 18 speed trans mission, Detroit Series 60 engine, runs and starts good, Serco 8500 loader tight boom and grapple, 300,000 miles. 1996 Express 5 axle pup Trailer. Good brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Western Star	6 Axle	2013	$135,000
	John Deere 653G Feller Buncher *SOLD* 2001 John Deere 653G Feller Buncher with a Waratah FS-22" Felling Head. This machine has a John Deere 6068H engine runs out well, starts reliably, Waratah cutting head is in good shape. Hour meter reads 9,851 hours, undercarriage needs some attention. New bearing in the head, newly replaced jib boom pin, recently serviced and ready for the woods. Sprockets, rollers, idlers, pads are all in good working order, tight pins and bushings all around, clean cab, all gauges work, heat and A/C work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. SOLD*	John Deere	653G	2001	$51,500
	Hood S-182 Self Propelled 6x6 Loader *SOLD* 2009 Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher. This loader has around 7,000 hours, runs and starts good, Pro heat, John Deere engine runs and starts good. Strong hydraulics and cylinders, main boom cylinder has been repacked, drive system is in good working order, pilot controls, 360 bypass grapple. 2005 Hood 60" Slasher with low hours around 200, new blade, solid frame no cracks or welds. Heavy duty tires, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Hood	S-182	2009	$80,000
	Tigercat 620E Skidder *ON HOLD* 2014 Tigercat 620E Skidder. This equipment has 35.5 x 32 rubber. Heavy Duty outboard planetary axles. For more information contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *ON HOLD*	Tigercat	620E	2014	Call for Price
	John Deere 450C Dozer *SOLD* 1978 John Deere 450 C Dozer. Replaced turbo with exhaust manifold. Newly replaced sprockets, front idlers, both track adjusters, rails and pads. Contact Erik @ Red Pine Equipment 218-720-0933. Dozer is located in Northcentral USA. *SOLD*	John Deere	450C	1978	$16,000
	Ponsse Ergo Harvester with H7 Head 2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$99,900
	Talbert 35 Ton Lowboy *SOLD* 1998 Talbert 35 Ton Lowboy. This trailer is tight for its age, detach is working as is should, no welds or cracks on the main beams, solid boards, brakes are @75%, Tires are @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Trailer is located in Northcentral USA. *SOLD*	Talbert	35 Ton	1998	$18,500
	Ponsse Buffalo King Double Bunk Forwarder *SOLD* 2013 Ponsse Buffalo King Double Bunk Forwarder. This machine was just gone through by Ponsse. Has a Mercedes 6 cyl. engine, runs and starts good, bunk extenders. New Wabasto engine pre-heater, fire suppression package, strong hydraulics, cylinder, pins and bushings were gone though. Tight Center bearing. Tight K100 crane and newer over-sized grapple. Bogies were gone through. Light package, premium seat with heat and A/C. Tires are in good working order. New Wiring harness. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Ponsse	Buffalo King	2013	$185,900
	DYNA SC-14 Firewood Processor *SOLD* 2013 DYNA SC-14 Firewood Processor with a 12' Lug Belt Conveyor. This equipment has a Kohler 34 HP gas engine, runs and starts good, 14"-18"max log capacity, log deck, 20" Oregon bar with 16 tooth sprocket, 4 way wedge, 12' lug belt conveyor, extra live deck arm, 404 saw chain, 78 drivers. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	DYNA	SC-14	2013	$22,500
	Morbark 628 Debarker *SOLD* 2005 Morbark 628 Debarker. This equipment has a 100 HP electric motor, cab, 25' in-feed trough, 20' out-feed trough, stands. Runs daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. *SOLD*	Morbark	628	2005	$40,000
	Morbark 636 Debarker *SOLD* Morbark Model 636 3 Phase Electric Debarker. 2 Linclon 100hp electric motors for debarker and conveyor. 50hp Lincoln Electric motor for live deck. Enclosed cab with controls. 60' in-feed trough, 60' out-feed trough. Bark conveyor included as well. 3 strand live deck, 20' width. Machine operates as it should and was working daily until recently. Buyer will be responsible for disassembling and moving equipment prior to 1/15/2020. Equipment located near Wilmington, NC. Seller will assist in arranging transport. *SOLD*	Morbark	636	Unknown	$60,000
	Western Star 4900SB Heavy Spec Log Truck *SOLD* 1999 Western Star 4900SB Heavy Spec Log Truck with a 1998 Timmins 20' Pup Trailer. This equipment has a CAT 3406E 475 HP engine, runs and starts good, 661,000 km, 18 speed Eaton Fuller transmission, new fuel pump, new exhaust, 20K front axle, 46K rear axles, 20K lift pusher axle, Rockwell. Full locking rear end, power divider. New springs front and back, 4 brand new drive tires all others are @ 60%. Timmins Pup trailer has 3 axles 1 air lift, solid tongue. 5" ball hitch, tires are @ 50%. 1999 Serco 8000 24' boom, continuous rotation grapple, two stick controls, tight loader. Will entertain trade for cable skidder. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. *SOLD*	Western Star	4900SB	1999	$45,000