All listings for: RedPineEquipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Tigercat 630E Dual Arch Grapple Skidder ***SOLD***2017 Tigercat 630E Dual Arch Grapple Skidder with Winch. Hour meter reads 5,131 hours, runs and starts good, strong hydraulics and transmission, new center section, arch and grapple are in good working order. Strong winch. 35.5 tires & 24.5 32 dual tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. ***SOLD*** |
Tigercat | 630E | 2017 | $152,500 |
|
Komatsu 228LC with a 2018 Ryans Dangle Saw Head ***SOLD***2001 Komatsu 228LC with a 2018 Ryans Dangle Saw Head. This equipment has a Cummins 5.9 engine, runs and starts good, hour meter reads 8,800 hours, strong hydraulics and cylinder, drive motors are in good working order, undercarriage is @ 50%+, 33" triple grouser pads, extra roller on u/c, tight boom. Ryan head has a 30" cut, good grab arms, and saw blade. Heat, A/C, and lights. Also has quick coupler & Forestry guard package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Komatsu | 228LC | 2001 | $92,500 |
|
International w/Prentice 180D & 60" Siiro Slasher ***SOLD***1980's International Load-Star Loader Truck with a 1990's Prentice 180D Loader and a 60" Siiro Slasher. This truck has a 671 Detroit engine, runs and starts good, 13 speed transmission. Prentice 180D Loader has a John Deere engine, runs and starts good, electric block heater. Joystick controls, tight boom and pins. Turn table is in good working order, newer swing motor, Barko 1/3 bypass bucket. Siiro Slasher has straight a blade and good teeth. Cab has heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Prentice | - | Unknown | Call for Price |
|
Brute Force 18-24 Firewood Processor ***SOLD***2015 Brute Force 18-24 Firewood Processor with 14' Swiveling Conveyor. This processor has a 4' frame extension, 4 & 6 way wedge, and 37 HP gas engine. Estimated 800 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
Brute Force | 18-24 | 2015 | $27,900 |
|
HAHN HFP-150 Firewood Processor ***SOLD***2017 Hahn HFP-150 Firewood Processor - Late model Hahn HFP-150 with very low hours. Has cut about 30 cords of wood. Comes with controls & 6-way hydraulically adjustable splitting wedge. Contact Kelly @ Red Pine Equipment 218-720-0933. Attachment is located in Minnesota. ***SOLD*** |
Hahn | HFP-150 | 2017 | $18,900 |
|
Great Lakes 44' Drop Deck Trailer ***SOLD***2000 Great Lakes 44' Drop Deck Tri-Axle Center Mount Crib Trailer with a Serco 7000 Loader. This equipment has air ride suspension. Aluminum cribs and front and back gates. Good brakes and 11R22.5 tires. Serco 7000 has a tight boom and SureGrip grapple, strong hydraulics and cylinders. New bolts on the turn table. Trailer has been serviced. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Great Lakes | 44' | 2000 | $27,500 |
|
Timberjack 460C Skidder ***SOLD***2000 Timberjack 460C Skidder. This machine has approximately 500 hours on a new recon Cummins 5.9 motor, all new hoses, new center section and cradle, new hydraulic pump and a spare pump goes with machine. 35.5 x 32 rubber, well maintained and working daily. Call Erik @ Red Pine Equipment 218-720-0933 for more info or to setup a viewing. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 460C | 2000 | $37,500 |
|
Timberjack 230A Forwarder ***SOLD***1996 Timberjack 230A Forwarder. This forwarder has new front cradle pins and bushings. new blade pins and bushings. both blade cylinders have been repacked. newer clutch. Valve bank resealed, pins and bushings in boom have all been changed over the last 5 years. New steering and shift cables. LED lights. New starter, new alternator, new bucket and rotator. New exhaust. New swing motors on boom plus 1 gear box on boom. New differential lock assembly on rear axle. New seat many of the hoses have been changed. Hydro pump and pump drive are about 4 years old. Main cylinder was repacked and changed to 3/8” thick barrel. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Timberjack | 230A | 1996 | $38,500 |
|
CASE 850E LT Dozer ***SOLD***1993 CASE 850E LT Dozer with Winch and Forestry Package. This dozer has a Case 6-590 engine, runs and starts good, strong hydraulics and transmission. 18" pads, long track, undercarriage is in good order. Forestry package. Rebuilt winch. 3/4 swedge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
CASE | 850E | Unknown | $35,500 |
|
Fabtek 546C Double Bunk 6 Wheel Forwarder ***SOLD***2001 Fabtek 546C Double Bunk 6 Wheel Forwarder. This equipment has a new John Deere 6068T crate engine 1,000 hours ago, strong hydraulics and cylinders. Pump was gone through same time as new engine, PowerShift transmission, new center section 1,000 hours ago. Bogies are in good working order, tight boom and SureGrip 360 grapple, Pro-Heat system. Straight bunks, new rear and side glass, 710 rear tires @ 75% with tracks and 30.5 x 32 front tires @ 75%, blade. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Fabtek | 546C | Unknown | $74,900 |
|
CAT 518 94U Skidder ***SOLD***1984 CAT 518 94U Grapple Skidder with Winch. This equipment has a CAT 3406 engine, runs and starts good, CAT 3 speed auto transmission, Transmission was rebuilt 1,500 hours ago, new master cylinder on the front, new rear differential. Esco Grapple, Gearmatic winch has a rusty drum. 23.1x 26 Firestone tires @ 70%, some new glass, brush rack on blade, heater. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
CAT | 518 94U | 1984 | $22,500 |
|
John Deere 440C Skidder ***SOLD***1986 John Deere 440C Cable Skidder. Hour meter reads 5,021 hours, runs and starts good, strong hydraulics rebuilt steer cylinders, decent center section, winch works as it should. 18.4 x 26 front tires with 400 hours. 5/8 swedge cable. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
John Deere | 440C | 1986 | Call for Price |
