All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	John Deere 548D Skidder 1980 John Deere 548D Single Arch Grapple Skidder with Winch. John Deere turbo diesel engine. 23.1x26 tires are estimated at 65%. Set of chains could be included. Winch is in good working order. All missing shields are included but not installed. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	548D	1980	$25,000
	Timberjack 450 Skidder 1993 Timberjack 450 Grapple Skidder with Winch. Hours are unknown. Cummins 4BT engine starts and runs good. 30.5x32 tires are estimated at 50-70%, one rim could be replaced. Center pins, arch pins, and grapple pins are tight. Winch is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timberjack	450	1993	$35,000
	Valmet 546 WoodStar Series II Forwarder 1995 Valmet 546 WoodStar Series II Forwarder. Hour meter reads 20,000 hours. Brand new Ford engine with 15 hours. 700 bogie tires estimated at 65%, front tires are estimated at 50%. Additional set of chains included for the bogies at 75%. The chain set on the bigger tires are at 40-50%. Center tube bearings have less than 500 hours. Many new parts, hydraulic swivel fittings on the boom, alternator, batteries, turbo, manifold, rebuilt starter, & hoses. Spare engine and extra parts included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Valmet	546	1995	$37,500
	CAT 312 Excavator 2000 CAT 312 Excavator. Hour meter reads 6,635 hours. 24" tripe grouser pads, undercarriage is estimated at 65%. Newer exhaust system. Heat, lights, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	CAT	312	2000	$39,500
	Multitek 2020 LDCS Firewood Processor 2002 Multitek 2020 LDCS Firewood Processor with 15' Blockbuster Conveyor. New Yanmar 4cyl diesel engine with an estimated 425 hours. 8 way wedge. 14' hydraulic chain-driven conveyor. New electric boost pump, new alternator, new battery. Shuttle grapple in good working order. Tires are brand new. Includes extra bar and 8 chains. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Southcentral USA.	Multitek	2020 LDCS	2002	$35,000
	Multitek 2020 LDCS Firewood Processor with 30' Conveyor 2003 Multitek 2020 LDCS Firewood Processor with 30' Conveyor. One owner machine, stored inside its whole life. 460V, 3 phase 40 HP electric motor. Frame hours are unknown but thought to have very little, used during winter to feed boiler. 8' log deck included, 6-way wedge. Hydraulic 30' Conveyor with Grizzly Bars. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA.	Multitek	2020 LDCS	2003	$30,000
	Prentice 325 Log Loader Prentice 325 Log Loader. Owner states 8,000 hours on meter. Boom and grapple are tight, has a dead heel. Brakes are good and lift axle works. Tires are estimated at 20-60%. Outriggers are functional. Heat and A/C in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Prentice	325	-	$21,000
	Wood-Mizer FS500 Log Splitter 2016 Wood-Mizer FS500 Log Splitter. Hour meter reads 400 hours. Minimal use. One side has a 10-way wedge, the other has a 6-way wedge. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Wood-Mizer	FS500	2016	$12,000
	Bobcat T740 Skid Steer 2023 Bobcat T740 Skid Steer. Hour meter reads 740 hours. Cab Plus package. 80" bucket with a good cutting edge. Tracks are 85+%. Enclosed HVAC Cab, Adjustable vinyl suspension seat, power Bob-Tach, oval display, standard lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Bobcat	T740	2023	$73,500
	Woodsman 430T Track Drum Chipper 2011 Woodsman 430T Track Drum Chipper. Hour meter reads 4,946 hours. Cummins QSX15 600hp engine, pre-DEF. PT Hydraulic Clutch. 32" triple grouser pads, undercarriage is estimated at 80%. Drum is good, no pitting, feed chain is also good. Babbitt style knife system. One new travel motor, new main drive belt. Wireless remote control, unit has original paint. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.	Woodsman	430T	2011	$117,900
	Eastonmade 60C Firewood Processor with STK32 Conveyor 2023 Eastonmade 60C Firewood Processor with Eastonmade STK32 Conveyor. Hour meter reads 950 hours. Kubota diesel engine. 60" circular saw. 12-way wedge. STK32 conveyor, 17-foot loading height. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA.	Eastonmade	60C	2023	$168,500
	Valmet 546 Forwarder 1999 Valmet 546 Forwarder. Hour meter reads 6,000 some hours but doesn't work. Valve bank has been completely rebuilt. New center section, fully rebuilt, cylinder got new rods and seals. New 23.1x26 front tire. Bogie tires are estimated at 15-30%. Newer ponsse grapple is tight. New glass. Heat works, A/C is there but not sure if functional. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Valmet	546	1999	$31,000