All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	Timberjack 460 Skidder *SOLD* 1998 Timberjack 460 Dual Arch Grapple Skidder. Cummins 5.9 crate engine with approximately 500 hours. Center section has a little movement. Transmission is good. 30.5 tires, 1 is new and 3 are at 20%. Has chains to go with. Enclosed cab has heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Timberjack	460	1998	$29,000
	Valmet 425EXL Processor with Rolly II *SOLD* 2004 Valmet 425EXL Processor with Rolly II Processing Head. Hour meter reads 19,800 hours. Cummins QSC 8.3 engine starts and runs good. Woodland Eaton computer system. 24" double grouser pads. Undercarriage is at 90%. New pins and bushings in boom, new bushings in the leveling cylinder, recently repacked main boom cylinder. New converter, new fuel pump, new fuel injection pump. The Rolly II head is in good condition. Was a rebuild from 2016. Roller and feed wheels are in good shape. Enclosed cab has heat, A/C, & radio. This machine is ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Valmet	425EXL	2004	Call for Price
	Clark 666 Swing Grapple Skidder with a Clark Winch*SOLD* 1978 Clark 666 Swing Grapple Skidder with a Clark Winch. This equipment has a John Deere 4.5 liter engine, runs and starts good, transmission is in low range, tight boom and grapple, center will need some attention, strong hydraulics, swing and blade cylinders were rebuilt. Brand new brakes. 23.1 x 26 tires @ 75% with Double Diamond chains. Can come with a parts machine, good rear end and planetaries. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Clark	666	1978	$15,500
	Rottne H14 with 561 SP Processing Head 2008 Rottne H14 Processor with 561 SP Processing Head. Hour meter reads 12,000 hours. John Deere 6068 engine starts and runs good. 600/45-26.5 tires are at 85%. RK 140 boom is tight. Self leveling cab works as it should. New pins and bushings, the brake on the head, knife pins & bushing, and repacked cylinder. Cab bushing has recently been changed. Enclosed cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Rottne	H14	2008	$105,000
	John Deere 703 JH Processor *ON HOLD* 2012 John Deere 703 JH Processor with a Waratah 622B Processing Head. Well maintained machine with a 6081 Engine that starts and runs good. Has Proheat - works great. New pumps on carrier and a lot of new parts and hoses in head last spring. New saw motor, saw housing, resealed main valve in head. Alpine feed wheels. New glass. 26" double grouser pads, undercarriage is in good working condition. Stereo, Heat, & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *ON HOLD*	John Deere	703JH	2012	$144,500
	John Deere 648G Skidder *SOLD* 1995 John Deere 648G Skidder. Strong 6068 John Deere power unit is in good working order. Only 1,000 hours on engine and current pumps. All around tight for age. 73 x 44-32 rubber @ 80-90%. 1 Set of chains. Good center section, heat, AC, new glass. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	John Deere	648G	1995	$41,900
	Mack DM685S Tandem Axle Dump Truck *SOLD* 1976 Mack DM685S Tandem Axle Dump Truck. Mack 300 engine, 270,000 miles on odometer. 11R22.5 Tires. Well kept truck for the age. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Mack	DM685S	Unknown	Call for Price
	35.5 Tires, Dual Rims, & Diamond Chains 35.5 Tires, Dual Rims, & Diamond Chains. The four tires are estimated at 20%. Four dual rims that are in good condition, removed from a Timberjack 660. 2 sets of like new 3/4 double diamond chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	-	35.5x32	Unknown	Call for Price
	Waratah H290 Processing Head *SOLD* 2009 Waratah H290 Processing Head. Approximately 10,000 hours. Removed from a John Deere 1470D processor. Includes the head module, & will work with any machine running a Timbermatic Control System. This head has a super cut 100 saw unit. Also has spare pins, diameter sensors, guards, measuring wheel parts, and a parts book. This is a well maintained processing head that is ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Waratah	H290	2009	Call for Price
	Siiro 60" Slasher Saw *SOLD* 1996 Siiro 60" Slasher Saw. New blade last year. Has a new bang board cylinder. Tires are good. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Siiro	60	1996	$6,500
	Wood-Paker G300 Firewood Bundler *SOLD* 1994 Wood-Paker G300 Firewood Bundler. This equipment comes with a few shrink wrap rolls and supplies, assembled, L.P. gas ovens, chain and gear drive. 300 packages per hour. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Wood Paker	G300	1994	$7,900
	Danzco T18 Delimber *SOLD* 2004 Danzco T18 Delimber. Has a Yanmar diesel engine. One owner. Approximately 500 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. *SOLD*	Danzco	P18	2004	Call for Price