All listings for: RedPineEquipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Morbark Wolverine Three Wheel ***ON HOLD***1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Morbark | Wolverine | 1995 | $28,900 |
|
ASV RT-65 Skid Steer with 67" Virnig Bucket ***SOLD***2019 ASV RT-65 with 67" Virnig Bucket. Hour meter reads 165 hours. Deutz diesel starts and runs good. 2 speed. Recently serviced and has a new battery. 15" wide tracks are like new. Premium hydraulic option, high and low flow (22.2 gpm and 27.4 gpm), with a self level 67" Hydraulic Quick Attach bucket. 3,300 psi max pressure. Rear view camera, backup alarm, all-weather cab option, roof panel, air ride, heat, A/C, and radio. LED lights in the front and rear. Pilot hydraulic joystick controls. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
ASV | RT-65 | 2019 | $57,900 |
|
Morbark 40/36 Chipper2015 Morbark 40/36 Chipper. Hour meter reads 2,955 hours. CAT 765 HP engine starts and runs good. No dents on the belly. Drum pockets are in good working order, drum has some welds. Feed chain and sprocket show no wear, & hydraulics are strong. Chassis and frame are good, chute frame has some welding near blower. Tires and brakes are in excellent condition. LED display. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Morbark | 40/36 | 2015 | $359,000 |
|
Serco 2050 Loader with Serco 72" Slasher ***SOLD***2018 Serco 2050 Loader with Serco 72" Slasher. Hour meter reads 4,600 hours. John Deere 6068T Tier 3 engine starts and runs good. 30' boom. IQAN engine & hydraulic monitor & control system. Michelin tires on the carrier are estimated at 90%. This loader has a 30' boom, with a Serco bypass grapple & SureGrip joystick controls. Cold weather starting package. Enclosed cab has heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 2050 | 2018 | $214,900 |
|
Franklin 132 Single Bunk Forwarder ***SOLD***1985 Franklin 132 Single Bunk Forwarder. This machine has a 4 cyl. John Deere engine, runs and starts good, decent center section, roof mounted loader in good working condition, 23.1 x 26 tires @ 75%, strong transmission. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Franklin | 132 | 1985 | Call for Price |
|
Morbark 30RXL Whole Tree Disc Chipper ***SOLD***2006 Morbark 30RXL Whole Tree Disc Chipper with Morlift 1000 Loader. Hour meter reads ~7,000 hours. CAT 3412 engine starts and runs good, originally had 760hp but has been tuned to around 1,000 HP. New ECM and clutch, 3 knife rotor, Swivel discharge. This chipper produces a clean chip. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Morbark | 30RXL | 2006 | $142,500 |
|
Komatsu 931.2 with C144 Harvesting Head ***SOLD***2017 Komatsu 931.2 with C144 Harvesting Head. Hour meter reads ~2,700 hours. Agco Power 74 AWF 6cyl Engine. 710x26.5 & 710x34.0 TRS tires are at 85%. This machine has the Autolev leveling system, Webasto preheater, & Maxi Xplorer computer system. Tight center section, has a roller guard. Enclosed cab has auxiliary heating, A/C, & radio. Also has air ride with a heated & cooled KAB comfort seat, & 360° xenon lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA ***SOLD*** |
Komatsu | 931.2 | 2017 | Call for Price |
|
Bell's 6000 Firewood Processor ***SOLD***2017 Bell's 6000 Firewood Processor. Hour meter reads 480 hours. CAT C4.4 engine starts and runs good. 32' Bell's conveyor included. 8 & 12 way wedges with new teeth on the blade. Cab has heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Bell | 6000 | 2017 | $122,500 |
|
DYNA SC-16 Firewood Processor ***SOLD***2010 Dyna SC-16 Firewood Processor. Hour meter reads 988 hours. CAT 50 HP diesel engine starts and runs good. Rated capacity is 16" diameter and 16' long logs, with a maximum diameter of 22". Operator seat, 6 way wedge. 16' conveyor. Processor was fully refurbished in 2019 at DYNA and has only been ran 100 hours since then. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
DYNA | SC-16 | 2010 | $45,000 |
|
Cord King M20-30 Firewood Processor ***SOLD***2014 Cord King M20-30 Firewood Processor. Hour meter reads 598 hours. 16' conveyor, 3 leg live deck, with 6 & 8 way wedges. New belt on the conveyor, oil cooler, splitter cylinder, & adjustment cylinder. Automatic hydraulic log stop that's adjustable. Log grabber for a skid steer is included. Also included is a canvas cab enclosure that has been made to fit and a few spare parts. Maintenance records can be provided upon request. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. ***SOLD*** |
Cord King | M20-30 | 2014 | $49,500 |
|
Timberwolf PRO HD XL Firewood Processor ***SOLD***2015 Timberwolf PRO HD XL Firewood Processor. Hour meter reads 700 hours. John Deere 80 HP diesel engine. This processor has all the available upgrades. TW30 Chain Drive stacking conveyor. Honda standalone motor on conveyor. Hydraulic hookups to run the conveyor off of the processor. Clean out grates on the processor and conveyor. The seat is in great condition. Hydraulic cooler, & hydraulic deck lift. Has 4, 6, & 8 way splitting wedges. Also has a block heater. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. ***SOLD*** |
Timberwolf | PRO HD XL | 2015 | $60,000 |
|
Ponsse Buffalo King Forwarder ***SOLD***Salvaged 2012 Ponsse Buffalo King 8 Wheel Double Bunk Forwarder. This forwarder burnt up from the front. Many parts are still good, K100 crane and grapple, all bunks still good, tires rims, bogies, there was 9,000 hours on machine, headache rack, blade, grill. Many other parts available. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Ponsse | Buffalo King | 2012 | $25,000 |
